Coating Thickness Meter
( TG-500 )
Brief Introduction
• With built-in probe(s)
• Auto power off
• Magnetic induction or eddy current operation principle
Technical Specification
|
Operation principle
|
Magnetic induction & eddy current
|
|
Measuring range
|
0～1250μm/0～50mil
|
|
Resolution
|
0.1μm/1μm
|
|
Accuracy
|
±1～3%N or 2.5μm
|
|
Minimum work piece diameter
|
F: convex 1.5mm/0.06", concave 25mm/0.98"
NF: convex 3mm/0.12", concave 50mm/1.97"
|
|
Minimum measuring area
|
￠6mm/0.24"
|
|
Minimum sample thickness
|
0.3mm/0.012"
|
|
Power supply
|
4×1.5V AAA batteries
|
|
Dimension
|
126×65×27(mm)
|
|
Weight
|
82g |
Standard Delivery
• Main unit
• F type probe
• N type probe
• F calibration base set
• N calibration base set
• Calibration foil set
• Carrying case
• 1.5V AAA battery
• Optional Accessories
• Cable and software for RS-232C
Application
• TG-500F can measure the thickness of non-magnetic coating layers (aluminum, chrome, copper, ename1, rubber, paint) on magnetic substrate (steel, iron, alloy and magnetic stainless steel)
• TG-500N can measure the thickness of non-conductive coating layers (ename1, rubber, paint, vanish, plastic anodic oxide layer) covered on non-ferrous substrate (aluminum, brass, zinc, tin and non-magnetic stainless steel)
• TG-500FN: 2 in 1, F&N type
|
