•  In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
•  Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes.
•  Individual high quality ccelerometer for accurate and repeatable measurements.
•  Wide frequency range (10Hz~10kHz) in acceleration mode.
•  Optional headphones for use as electronic stethoscope.
•  Bearing condition monitoring function.
•  Use "USB data output" and "RS-232 data output" to connect with PC.
•  Provide "Bluetooth ™ data output" choice.
  

 

•  Sensor   Piezoelectric Accelerometer 
•  Measuring Range :  Acceleration: 0.1~400 m/s²   0.3~1312 ft/s²   0.0~40 g   Equivalent Peak

•  Measuring Range :  Velocity: 0.01~400 mm/s   0.004~16.0 inch/s   True RMS 
•  Displacement: 0.001~4.0 mm   0.04~160.0 mil   Equivalent Peak-peak 
•  Frequency Range   Acceleration: 10 Hz ~ 1k Hz   10 Hz ~ 10k Hz 
•  Velocity: 10 Hz ~ 1k Hz 
•  Displacement: 10 Hz ~ 1k Hz 
•  Accuracy :5 % of Reading + 2 digits 
•  Metric / Imperial Conversion 
•  Analogue Output   AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k) 
•  Max. Value Hold 
•  Power Off :Manual Power Off or Auto Power Off 
•  Battery Indicator :Low Battery Indicator 
•  Data Output :USB, RS-232, Bluetooth 
•  Operating Conditions :Temperature: 0~50 °C Humidity: <90 %RH 
•  Power Supply:4 x 1.5V AAA size (UM-4) Battery 
•  Dimensions :124 x 62x 30 mm 
•  Weight :120 g (Not Including Batteries)

 

•  Main Unit
•  Magnetic Suction Seat
•  Piezoelectric Transducer
•  Probe (Cone)
•  Probe (Spherical)
•  Carrying Case
•  Manual Book